A carpentry trick everyone needs to know!

čas přidán 24. 10. 2021

Komentáře

  • *These shorts make my day* 👑

  • Could of just pulled it with your hand…

  • I just use my foot or hand.

  • PFFFFFFFFT

  • Pretty sure everyone and their momma knows this trick already

  • Move it in place with your hand you donut!

  • I don't have a drill screws or a nail gun is what they said 100 years ago

  • Just use your hand

  • Just hold it with your hand ya fool.... This is muppetry not carpentry!

  • My hero

  • What the fuck. You didn't need to drill that screw in dip shit..

  • If you hold it with your hand and slap yourself with your other hand...

  • I just use a crescent wrench or channel locks to grab it and flex it into place… no hole 😁

  • Haha just the claw needed whos showing you this shit 😂

  • I could of sworn this was a common sense trick....

  • What u need to do to be efficient is have too much equipment. That should slow down your work due to adding unnecessary steps to the process.. impressive

  • If it's that loose. Use your damn hand

  • They put these nonsensical videos out so that we’ll comment and feed their algorithm. Well, I’m not going to play their stupid games! Wait…

  • Can we just appreciate that these shorts save our boredem everyday!

  • Thats retarded/ just hold it with your hand as u were in the beginning lol

  • Ain't nobody got time for that!

  • Did you get that hammer on Pinterest

  • You moved it in place with your hand.

  • Not taking tips from a dude that hydro dips his hammer.

  • The trick is to get a nice cut. It takes a few years to be able to see those 1° inconsistencies so you can cut it tight so it fits right to begin with

  • He had it the first time! So damn extra

  • Oh my God, enough with the aligning wood with the hammer trick. son of a bitch!

  • This is dumb. Of you've done any kind of frame work at all you can figure this shit out

  • Wow really. I thought you were going to show something cool

  • Did anyone else click just based on the paint job on the hammer?

  • Oldest trick in the book. Get a paslode

  • I can't think of a single person I know that's even slightly experienced in carpentry that DOESNT know this "trick" most would just hold it square with their hand or hammer but hey you do you.

  • I thought the Oldest Trick in the Book Is the Bucket of Water on Top of the Door that Falls when you Open it.

  • Made a science project out of nailing a board wow.

  • Is that a trick??? If you’re doung stud work and you’re amazed by this then maybe get someone to check your work

  • So you wast time with a screw when you could have pulled it over with your hands what a dumbass

  • Can I box of toenails please? Do you know where I can find them? In your truck?

  • Lol ay

  • Ever hear of toe nailing it?

  • Duh

  • Well il be fucked. Hahaha

  • I bet there’s some older tricks.

  • What is with the paint job on the hammer? Why are you using such garbage wood it literally looks like it was RIPPED off a pallet you found in a dumpster behind a abandoned crack house.

  • If you take that long I'd fire you!

  • To each his own, but this is a waste of time.

  • I've been in construction for over 22 years and haven't seen this, most guys just put a level on it and nail it in, the only time I put a screw to hold something is if I'm doing a drywall patch and I have to reach in the opening with backing if I'm in-between studs, I'll screw a screw into my backing for a handle while I screw it in top and bottom but of course will remove my handle.

  • The world's crappiest board

  • Why didn't he just uses hand

  • You obviously work on day work

  • Add this to the other thousand videos that are the same. It’s not like it’s magic. A greenhorn knows this stuff.

  • Literally could’ve got that claw behind that 2x4 what a waste of time

  • You just proved you could’ve held the board to do that

  • Yeah dates back to before jesus then jesus invented the paslode 😂💪

  • This is literally not a trick in everybody knows a better way to do it

  • Nah man. Im just gonna hold my board with my hand if I can do so instead of wasting time needlessly

  • We used a nail. Rough framers rarely have a cordless screw gun that close

  • Doing too much..

  • Pulling the board with hand then setting with nail is oldest trick in book. This is useful if the board is too stiff to pull with hand

  • Just pull the wood flush? The name on the nail gun explains a lot 😂

  • Just pull the board with your hand and stick the nail in?

  • So when you Frame you walk around with screws and drill along with you tool pouch and framing. Productive.

  • I prefer my hand for that.

  • U moved it with your hand ,duu.

  • A wise man would just leave it as is and have a coffee

  • Nope. Will split down the road. Not the right way to do it.

  • WTF, morons post these videos, o real carpenters have time for this nonsense

  • People must post these knowing they’re gonna get smashed in the comment section because this is just completely ruhturded

  • Waarom makkelijk als het moeilijk kan

  • Back in the day when didn’t have electric drills hanging around what would you have done? WHAT?!?! 🙄

  • 2.4M views for something everyone already knows??? Please CS-tv start promoting videos of value!!!

  • Sorry not the oldest trick in the book…Back in the day no one had screw guns on a job or nail guns

  • And im sorry i HATE that hammer

  • Listen im a carpenter for 21yrs great trick my frail fancy hammer friend….you literally could use your man hands to move it in to place and get rid of that dang ol fart smellin paslode …

  • I think he just used this as a example I’d hope he knows he can just use his hand he was just demonstrating if you do need more leverage you can do this, maybe try looking at the message instead and you would realize that

  • You just put the nail in and move the board and then put in a second nail

  • Cute screw trick but try to avoid nailing studs on edge

  • Let's see what the level said🤔

  • Every carpenter learned long ago. Nothing new to see

  • What an idiot. I'd fire him on the spot.

  • Old school nail gun ? Interesting.

  • That timber will split in time. You should have done it on the long end (on the right) against the force of the warp. Oh and yeah just flex it with your hand and nail/screw it no need for all those tools.

  • Lol if your too weak to pull that flush by hand and nail it go home dude

  • I hydro dipped my hammer too

  • Now I have to go out to the truck and find the correct size screw and get the drill with the proper tip and ask the boss if it’s ok to do this

  • Splits every time!

  • Hammer looks nice 😆

  • If you nailed that wood anywhere it would have been solid.. you don't need a trick or book.. what do you call it..? Brain.. yes its called brain..

  • Why was there only 1 nail used in the first place? I always put 2 when I framed houses.

  • This again!!!?? How many people need to make the same vid!?

  • Not sure if it is the oldest trick... but definitely one of the most over shown wood working hacks on the interweb. 🤠

  • Why not just pull the board with your hand like you did lol then nail

  • Just used this idea on my polished oak timbers. Now how do I get rid of the screw hole !!!!

  • Just pull back the F'inn safety on your nail gun, hold your gun back a bit and shot a nail into your backing leaving the head of the nail hanging out and do the same thing with your hammer, nail it in and then pull the nail!!! Frickin office boy!!!🤓🤓

  • What a load of bullshit.

  • If I see this tip on CS-tv again...

  • materials wasted we all got two hands and two legs

  • Why did he need to use a trick?

  • All I saw was how so split a board

  • You started off by showing how flexiable it was, then you had to use a screw and hammer to pull it to the position you already did with your hand.

  • So stupid and those paslode fasteners stink.